NewWater Boatworks

• Ultra shallow water performance
• Advanced composite construction
• Effortless poling
• Whisper quiet
• Third person carrying capacity
  
• Extremely maneuverable, sea kindly, and dry
• Custom built - one boat at a time with all fabrication and rigging performed in house
• All customers are sea-trialed on their new boat upon delivery
• Original design developed on the water
• LamiflowTM; New Water’s exclusive tunnel design, allowing the propeller to be run above the hull bottom in an energy efficient laminar flow of water - all without doing damage to our precious grass flats
• LamiventTM (optional); New Water’s patented technology, provides tunnel or non-tunnel hull performance with the flip of a switch
• Yacht quality surfaces, styling, fit and finish
• Clean non-glare custom blended New Water white
• Non-skid on all walking surfaces
• Huge dry storage compartments under fore and aft deck with oversized dam systems and unique underdeck manifold drains, gasketed, locking and quiet
• Self-bailing cockpit with oversized scuppers and cambered deck surfaces
• Interior compartments are non-lined and hand finished Awl GripTM polyurethane to save weight and increase storage space
• Aft deck seat cushion (removable) folds into cockpit while fishing - does not cover up rear storage hatch
• Custom-contoured console backrest cushion
• Upholstered YetiTM 35 Qt. Tundra cooler (removable)
• All upholstery handmade using hi-dense foam and heavy-duty marine vinyl
• Large radii throughout provide safety, strength, and rapid draining
• Navigation lights, SS Bilet LED sidelights
• Full 5-year structural limited warranty

MECHANICAL FEATURES

• TeleflexTM Sea Star hydraulic under mount steering helm
• 2 - 550 GPH Auto/Manual bilge pumps
• Fuel filer/water separator
• 18 Gallon .125” welded aluminum fuel tank (accessible)
• On-Off battery switch

• Fully cored
• Carbon fiber and E glass
• Foam, carbon fiber, and E glass structure with extensive limbers to ensure inner hull draining and long-term lightweight integrity
• AshlandTM modified epoxy resin
• PlexusTM methyl methacrylate adhesives
• Awl GripTM polyurethane all interior surfaces
• Thru-bolted and bonded hull/deck joint
• Cook ArmorcoteTM in mold coating
• Hatches constructed in multi piece tooling providing polished interiors to ensure a 100% seal against gaskets
• Total wood free composite including transom
• Console laminated to deck prior to hand-finishing, the ultimate in lightweight, strength, and cleanliness - with no fasteners

• All anodized aluminum or 316 stainless steel chrome plated hardware thru-bolted with stainless steel/nylon locknuts
• 4.5” stainless steel pop-up cleat on foredeck
• Stainless steel fuel fill and vent
• Welded anodized aluminum console grabrail
• Welded anodized aluminum rails outboard of helm cushion
• Flush stainless steel hinges
• Stainless steel bow and stern eyes
• Anodized aluminum rubrail thru bolted
• Stainless steel flush cooler hold-downs
• Locking stainless steel compression-style latches on hatches and console door
• Stainless steel gas shock lifts on hatches
• Stainless steel garboard drains

• Ergonomically designed pod style helm provides comfortable operation standing or seated
• Recessed gauges in carbon fiber panel under acrylic with anodized aluminum bezel
• Weather protected, recessed, backlit switches and 12 volt power supply with circuit breakers in anodized aluminum
• Color-coded tinned copper wiring harness
  
• Welded anodized aluminum wraparound grab rail
• Hinged/lift-out locking door with removable storage pouch
• Anodized aluminum steering wheel with billet hub and power knob
• Molded-in compass flat
• Large footprint providing space for rigging accessories (keeping weight off the stern and components out of the elements)
• Laminated to deck prior to hand-finishing

• The Stilt was developed through several years of on the water testing one off designs - numerous length-to-beam ratios, running surfaces and hull forms were evaluated in our quest for the perfect skiff
• A length-to-beam ratio of 4:1, along with canoe sections forward, provide the effortless poling of a micro skiff yet provide third person carrying capability, zero hull noise, extremely smooth ride, range and versatility
• Stability is enhanced by waterline length, low deadrise angles and a close relationship between chine beam and overall beam
• Lower freeboard not only keeps sail area down and minimizes weight, along with a slightly cambered running surface, it guarantees maneuverability and tracking on the push pole second to none - even when it is howling
• An oversized spray knocker and horizontal surface at the sheer provide extreme “overhang” i
  
  n the forward sections, keeping the ride very dry - even in a beam sea the four strakes below the waterline turn the spray down and aft
• Extreme ultra shallow draft performance with the propeller above the hull bottom are guaranteed with New Water’s exclusive LamiflowTM tunnel design
• The speed and low resistance which derive from her design can be further enhanced with New Water’s optional LamiventTM patented technology which provides tunnel or non-tunnel hull performance with the flip of a switch - Speeds over 30 mph can be reached with a 50 hp outboard
• Careful weight studies were conducted throughout the development to assure ultra shallow poling with even keel performance

• Horizontal rod storage under foredeck - unique design provides full-length rod tubes for up to eight rods 10’ long
• 2 Horizontal rod tubes under aft deck
• Separate deck and cockpit sole structures provide under-deck toe kick for secure footing and added storage
• Padded inner hull sides for sound deadening and reel protection
• 8-gallon livewell astern with a 1.5” drain (raw water pump and recirculate optional)
• Port light molded into livewell hatch
• Fish-measuring device molded into fore and aft hatches
• All deck hardware recessed for a snag free surface
• Full-width sidedecks joining fore and aft casting platforms into one continuous non-skid fishing platform

• Tall Console
• Leaning Post (for use with tall console, includes side hand rails)
• Folding Footrest - tubular
• Folding Footrest w/non-skid composite deck
• Frigid Rigid Ice Box (exchange for Yeti)
• Rod Holders - vertical flyrod
• Rod Holders - welded tubular
• Poling Platform - mini tower fwd of engine
• (Includes composite step treads)
• Poling Platform - conventional over engine
• Platform Options - composite step treads
• Grab Rail - fixed
• Grab Rail - removable
• TiborTM Pole Gripper
• MoonlighterTM Pole Gripper
• SeadekTM
• Cushion Set - removable
• Push Poles - StiffyTM 18’-21’
• available in:
• fiberglass
• fiberglass/graphite hybrid
• graphite
• graphite guide series
• Stake-Out pole socket
• Stake-Out pole - specify 5’ or 8’
• Push Pole Holders - standard MoonlighterTM
• Push Pole Holders - flush mount
• Power Pole - 6’ deluxe
• Remote Control
• Bow Casting Platform
• Bow Casting Platform (removable)
• (Includes SS pop-up cleat, pelican
• hook and turnbuckle)
• Net Basket - Baby pen for fly line management
• LineminderTM Rail - for fly line management
• LineminderTM (removable) - for fly line management
• Foredeck Toe Rail
• Storage Organizer on rear of forward storage hatch
• LED lights in forward storage
• LED cockpit courtesy lights
• Spreader light under poling platform
• Livewell plumbing - raw water through transom
• Livewell plumbing
• raw water running transom
• recirculationg
• Anchor ShadeTM - 6’ square boat umbrella
• (price includes custom receptacle mounted to
• console)
• Bimini Top - custom removable
• Travel Cover - custom AqualonTM
• Console Cover - custom AqualonTM
• Cowling Cover - custom AqualonTM
• Anchor, rode, and custom storage
• (includes 3 life preservers, 1 throwable, first
• aid kit, whistle, distress flag, fire extinguisher,
• flares, and custom bag)
• Additional SS pop-up cleats
• Windscreen (includes tall console rail)
• Jack Plate - Bob’sTM w/extension hoses, washer plate and hardware
• “Bass Style” seat receptacle - laminated under foredeck
• (sometimes used w/bicycle seat and pedestal)
• Trim Tabs
• Hull Color
• Cockpit Color
• Deck Color
• Two-Tone Non-Skid
• Teakwood Helm Pod and Accessories
• Custom Paint Outboard - AwlgripTM
• RitchieTM Compass
• Drink Holders - anodized aluminum
• Troll Motor Packages
• Dual ProTM onboard charging system (12V or 24V)
• RacorTM fuel filter (exchange for standard Sierra)
• LamiventTM
• Bob’s Lo Water Pick Up
• Electronics (GPS, sounder, VHF, stereo, etc.)
• Factory-Rigged Engine and Control Packages
• Trailer - MagnumTM
• (all trailers include spare with rack, stolz bow
• roller, side guides, and premium dolly jack)
• Custom low-profile drive on galvanized
• Custom low-profile drive on aluminum
• LED lights
• Aluminum mag wheels

Stilt Slideshow

Also, View the Stilt Unveiling and Tournament Banquet Photos